Cosmopol EL-VI TROPIC H²O

Steaming Tunnel

Categories: , SKU: 564127c03caa

Description

Cosmopol EL-VI TROPIC H²O Glue Reactivating Machine For Shoe and So

With a combined evaporation system, dehumidification and final reactivation, in particular when they are used in water based glues. The combined process of evaporation and drying removes the wet part retained by the leather.

The machine is equipped with electronic control system that allows the selection of 3 different programs for the management of reactivation with digital control of thermoregulation.

The working cycle is carried out in 4 zones, load – evaporation – reactivation – discharge.

1 – LOAD: The operator who smear glue has 6 trolleys destined for contemporary transport of sole and shoe-boots, which are traveling side by side.

2 – EVAPORATION: The sole and the shoe-boot enter into a tunnel and are hit by strong jets of air which are designed to accelerate the evaporation of the solvent of the adhesive. The solvent eliminated in the tunnel is recovered and evacuated through a duct.

3 – REACTIVATION: Sole and shoe-boot, pass under a heating parable. The heating that is the principle of reactivation, can be diversified in accordance that it is for the sole or for the shoe-boot.

4 – UNLOADING: The sole and the shoe-boot are taken by the operatore directly from the machine ready to be coupled and pressed.

The accelerated process of evaporation of the solvent (about 3 minutes against the traditional 25-30) allows a saving of lasts, and a reduction of the spaces dedicated to evaporation.

Technical Futures

  • Production: 1600/8 hours
  • Height: 160 cm.
  • Width: 105 cm.
  • Depth: 378 cm.
  • Weight: 620 Kg.
  • Power Supply: 400V. / 50Hz.
  • Power Consumption: 12 Kw
  • Adjustable Temperature: 0/80 C