Sagitta RP 80 A UP

Insole Binding Machine To Apply Tape

Categories: , SKU: cecd845e3577

Description

Sagitta RP 80 A UP Insole Binding Machine To Apply Tape

n

Edge banding machine for insoles

nThermo-gluing machine for insoles with programmable automatic cutting. Complete with table and Efka brushless motor with automatic positioning, it uses an optical fiber for the automatic detection and positioning of the edging tape. It is possible to use, after replacing the front and rear guides, belts between 14 and 25 mm wide. of leather or imitation leather in pre-cut strips or coils. Device for expelling surplus after cutting. Centering device and distribution of the edge band between the upper and lower part of the insole.
n
nThe advancement and positioning of the belt are carried out by an automatic guide with the possibility of adjusting the positioning point. The transport step of the insole can be adjusted according to the shape of the piece and to facilitate the execution of the curved parts. After a first manual edgebanding, RP 80 A stores the length of the perimeter of the insole and automatically cuts the ribbon after processing.
n

Technical characteristics

nVariable speed from 0 to 2200 rpm.
n
nTransport pitch adjustable from 1 to 6 mm.
n
nStandard guides for tape in 16 mm reels. Permanent oil bath lubrication Maximum absorbed power kW 0,9 Single phase power supply 230 Volt 50/60 Hz
n
nGuides for belts from 14 – 18 – 19 – 20 – 21 – 22 – 25
n
nMachine dimensions cm. 110 x 60 x 125 h.
n
nMachine weight Kg 140